Fastening On The Vesa Bracket - Caratec CAV191 Notice D'utilisation

3. Initial start-up and operation

3.5. Fastening on the VESA bracket

ATTENTION: When mounting the VESA bracket, please observe that the screws (M4) must
not protrude into the appliance by more than 10 mm max.
For fastening the monitor on a bracket, the foot can be removed as follows:
Diagram Procedure
Place the appliance cautiously onto an even
surface. If necessary, put a soft and clean cloth
underneath to prevent the LED screen from
becoming scratched.
Detach the foot from the retaining plate by
slightly pulling the retaining collar out of the foot;
thereafter turn the TV set to the right side.
Remove the foot by unscrewing the six screws
on the back and bottom side of the foot.
37