Publicité
Les langues disponibles
Les langues disponibles
en
34
L i g h t i n g
(C-Version)
Defective luminaires must be replaced
without delay. Before exchanging the
luminaires, power down the extractor
hood! The lamps will remain hot for
some time. Please wait until they have
cooled down before replacing them.
After cooling down, the hood body must
be swivelled out. For this, turn out the
two screws in the upper body of the
hood and secure the lower hood body
with one hand. After removal of the two
screws, swivel the lower part of the
hood down slowly. The luminaires are
now easily accessible and can be re-
placed. For this, first remove the socket
(a) from the luminaire (c). Then com-
press the spring ring (b) and take it out
upwards. The luminaire can now be
removed from the covering rosette and
replaced. When inserting the new lumi-
naire, always prevent skin contact. Pro-
ceed in reverse order for installation.
Attention: The hood body cannot be
swivelled down in the B or A versions! In
these versions, the luminaires are ac-
cessible through the filter space and are
removed in the same order.
r e p l a c e m e n t
Publicité
