Eaton Metalux WNLED Série Instructions D'installation page 2

Installation Instructions - WNLED-WSNLED Instruction Sheet
3. Remove driver cover (Figure 2).
4. For mounting, using the provided mounting holes on
each end of the fixture housing. Mount per required
application (surface or suspended), Appropriate
hardware should be used (supplied by others).
5. Make electrical connections according to code.
6. Install channel cover (Figure 3).
7 . Install lens on one side of the fixture and rotate to
engage the opposite side (Figure 4).
Figure 2.
2
EATON IB519015EN Installation Instructions
Figure 3.
Figure 4.