INSTRUCTIONS
the date change to the current date, i.e. the 21st. You now know that the time is in the AM
position of the 21st. Continue to advance the time to the correct hour of the day. Once done,
push the crown back in and gently screw clockwise to case.
To set the time only, unscrew the crown and pull it out to the second position (most outer
position). Turn the crown clockwise to advance the time. Then push the crown back in and
gently screw clockwise to case.
FEATURES
This Quartz Dive Watch features hour and minute hand markers using tritium gas tube
illumination. It is manufactured in accordance with ISO 6425. (Analogue, antimagnetic,
corrosion resistant, dive with 60 minute unidirectional dive bezel, water resistant to 30ATM,
high torque quartz movement, battery installed). This watch is equipped with a low power
consumption movement with EOL (End-of-Life) display whereby the second hand advances in
4 second increments when the battery needs replacing. Other features include stop second
feature, easy-set date function, sapphire crystal, maximum error rate of -0.3 seconds to +0.5
per day and shock resistant movement cage. Replacement battery is 371 button cell watch
battery or equivalent.
IMPORTANT
• Crown must be screwed in completely to ensure the watch is water-resistant.
• Use only certified service centers for servicing this watch, otherwise the warranty is void.
CAUTION: Do not attempt to set date if the hands are positioned between 20:00 hours and
01:00 hours. Adjusting the date in this position will cause damage to the date mechanism
and void the warranty. Use only certified service centers for servicing this watch, otherwise
the warranty is void.
OPERATING INSTRUCTIONS:
SETTING THE TIME AND DATE
If you are setting the watch for the first time,
unscrew the crown, then pull it out to the
first position; this is the rapid date setting
position. Turn the crown clockwise to advance
the date to the day before the actual date, (for example, if today is
the 21st, set the date to the 20th), then proceed to set the time by
pulling out the crown to the second position (most outer position).
Now, turn the crown clockwise to advance the time until you see
ENGLISH