Introduction - Chauvin Arnoux C.A 1623 Notice De Fonctionnement

C.A 1623 RTD probe temperature calibrator
To avoid all risk of electrocution or bodily injury:
•
Never apply a voltage in excess of 30 V between two terminals, or
between a terminal and ground,
•
Make sure that the cover of the battery compartment is closed and locked
before using the calibrator,
•
Disconnect the test leads from the calibrator before opening the cover of
the battery compartment,
•
Do not use the calibrator if it is damaged,
•
Do not use the calibrator in the presence of explosive gases,
vapour/steam, or dust.
In order to avoid damaging the calibrator:
•
Choose the right connection and number of wires before using the
calibrator to make measurements or a calibration,
•
Remove the calibrator from its working environment when it is off.
The RTD temperature calibrator is a precision portable measuring instrument
combined with a generator. It can be used to calibrate RTD probes (platinium
resistance thermometers).
The C.A 1623 can measure or simulate 7 different types of probe (°C or °F), and
resistance. It cannot be used as a measuring instrument and as a generator at the
same time.
PRECAUTIONS FOR USE

1 INTRODUCTION

14
English