Installation And Operation; Charging The Battery Pack - Sartorius YRB11Z Mode D'emploi

Installation and Operation

This battery pack is designed for use with Sartorius AC
adapter GPP8 and for connection to devices that use this
AC adapter. Use the AC adapter GPP8 that was supplied
with your device to charge the battery pack.
For details on the AC adapter, see chapter Accessories.
Charging the battery pack while supply power to your
device (DC IN and DC OUT)
1. Connect the AC adapter to the DC IN jack of the battery
pack.
Connect the Sartorius AC adapter to the AC power source.
2. Connect one end of the DC output cable to the DC OUT
jack of battery pack. Connect the other end of the DC
output cable to the DC IN jack of your device.
7