Publicité
TECHNICKÁ SPECIFIKACE
Dostupné Kanály
Výstupní Výkon (TX)
Životnost Baterie
Dosah
TABULKA KANÁLU
CÍSLO KANÁLU
1
2
3
4
5
6
7
8
POZNÁMKA: Maximální dosah je promenlivý v závislosti na terénu a prostredí.
CZ
8 Kanálu
0.5W
30 Hodin (obvyklá)
Približne 5 Km
FREKVENCE (MHZ)
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
-7-
GETTING STARTED
Carefully remove your communicator from its Packing. If there is any visible
damage, do not attempt to operate this communicator. Return it to the place
of purchase
Removing the BELT CLIP:
Figure 1.
1. Pull the BELT CLIP LATCH away from the unit.
2. While pulling the BELT CLIP LATCH, push up on the BELT CLIP to remove it
from the unit. See Figure 1.
Installing the Belt Clip:
1. Slide the BELT CLIP into the BELT CLIP SLOT. See Figure 2.
2. A "click" indicates the BELT CLIP is locked into position.
Battery Installation:
1. Release the BATTERY COMPARTMENT
2. Install 3x1.5V AAA alkaline batteries or
3. Reinstall the BATTERY COMPARTMENT
Figure 3.
Figure 4.
When the COMMUNICATOR is not being used, conserve battery power by
pressing the
button to OFF. Remove the batteries if the unit will not be
used for a long period of time.
Figure 2.
COVER LATCH located on the rear side
of the unit (see Figure 3) and remove
the BATTERY COMPARTMENT COVER
from the BATTERY COMPARTMENT (See
Figure 4).
Ni-MH rechargeable batteries (not
included) as shown.
COVER and lock the BATTERY
COMPARTMENT COVER LATCH into
position.
-2-
EN
Publicité
