Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
User manual
Please read this instruction manual carefully to ensure correct use of the machine
Thank you for purchasing this DMR Semi Auto Washing Machine.
The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and
this ensures that your DMR semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as
compared to other general twin-tub washing machines.
Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting
of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made
available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction
Technology parameter and specifications
Water capacity
high
low
36 L
32 L
Troubleshooting
Problem
The pulsalor is too slow
The pulsalor does not
rotate
Abnormal noise and
vibration
Water leaks from the
wash tub
Spin-dry basket does not
rotate
The spin tub does not
drain
Points of attention:
•
When the problem cannot be resolved, please contact the Service Center.
•
For your own safety, ensure that the ground connection is correct.
•
Never put your hands into the spin tub whilst it is working.
•
Never wash textiles containing volatile materials in order to avoid machine damage or water blockage due to stains.
•
The timer should always be turned clock wise
•
When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer
to troubleshooting)
•
When washing, the water temperature should be below 60˚C, otherwise, the plastic components may be deformed.
Input power
Power source
wash
dry
voltage
250 W
120 W
220 V
Reason
Power cut or switch off
Transmission belt left off
Belt pulley has become loose
Pulsator is blocked
Belt is loose
The clothes in the spin dry tub loosened
The clothes in the spin dry tub is unbalanced
There is something jammed between the pulsator
and the wash tub
Wash tub was not connected tightly to the hose
The slight switch is in loose contact
The fixed screw of spin dry basket or shaft coupling
is loose
The fixed screw of spin dry basket or shaft coupling
is loose
Brake dragline is loose
Something had cropped into the space between
spin tub and spin dry basket
Size (lxwxh)
hertz
655x405x760 (mm)
50 Hz
Solution
Switch on the power
Assemble the transmission belt
Tighten the belt
Remove the block
Tighten the belt or renew it
Tighten the belt and the screw
Replace the clothes in the tub
Remove the jammed object(s)
Reconnect and tighten the hose
Adjust the contactor of the switch
Tighten the screw
Remove the textile
Tighten the dragline
Remove the object
Weight
15kg
Publicité
