Publicité
Ignition OFF
Ignition ON
Ignition ON
Ignition ON
1.
Ignition ON
Indicator failure detection and lamp substitution if the trailer indicators fail
The failure of a single or on both trailer indicators will be shown depending on the type of vehicle and electric kit installed as follows:
• Increase in the flashing frequency
• Text message in the Display / combi-instrument
• Activated control lamp for light failure
• Audible warning via Buzzer or Voice-Message
If an indicator fails the left or right rear light compensates the faulty indicator by flashing at the correct frequency! ( lamp substitution).
/
87360541/26.01.2016
Seite 12/13 / © JAEGER automotive GmbH / Chromstrasse 90 / D-33415 Verl / FON: +49 5246-9210-0 / FAX: +49 5246-9210-20 /e-mail: info@jaeger-automotive.de
Diagnosis function of control LEDs
GN
RD
GN
GN
GN
RD
3.
RD
1x
max 60 sec.
or
2.
RD
=
No CAN-Data
CAN-Data Wire
/31:
B+/30:
PIN 2 or 4
Standby /
Sleepmode
PIN 13+14
PIN 1
Publicité
