Precautions; Safety - Sagem Axium HTD501 Manuel D'utilisation

1.

Precautions

1.1.

Safety

Respect all maintenance advice, safety precautions and instructions recommended in this
user booklet for your safety and to prolong the working life of the equipment.
• Definitions
• Safety regulations
Warning
Warning
Warning - Danger. Warning concerning user and equipment safety.
Warning - Warning about the risk of electric shocks.
Warning - Indicates a hot surface.
Warning - Warning about the danger of the lamp explosion.
This FLAT SCREEN DLP™ is a class 1 appliance; it MUST be connected to an
electrical wall socket equipped with an earth.
This FLAT SCREEN DLP™ is designed to function:
- with a 220-240 V, 50 Hz, AC (alternating current) network;
- at an ambient temperature between +5°C and +35°C;
- in areas with humidity less than 85%.
(For more details, see the "Technical Specifications" paragraph on page 26).
To avoid danger of overheating or electrocution:
- avoid direct exposure to sunlight and do not put naked flames or any other heat
source under the appliance;
- do not expose the appliance to water drips or splashes;
- do not place objects filled with liquid, such as flower vases, on the appliance;
- do not expose the appliance to very dusty environments;
- avoid shocks and vibrations.
You are recommended to disconnect the appliance from the power supply and the
aerial:
- during storms;
- when not used for long periods of time;
- when the appliance is malfunctioning (see paragraph: "Diagnostics and faults",
page 22).
If used with a PC, switch on the FLAT SCREEN DLP™ before the computer.
Make sure that ventilation grills are not obstructed by objects such as newspapers, table
cloths, curtains etc.
To avoid electric shocks, do not insert foreign bodies, such as needles, coins into the
ventilation grills.
Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation.
Before disconnecting the power lead, you are recommended to let the cooling fans work
for a few minutes.
2