Tag Display - Gallagher HR5 Notice D'installation

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Tag Display

VID Cross reference
The Hand Held Reader maintains a cross-reference table that links
an animal's Electronic ID with the animal's Visual Tag Number.
Once it makes this link, it will recall the Visual Tag Number
the next me the Electronic ID is read.
Cross-reference informa on containing EIDs and corresponding
VIDs can be exported to the Hand Held Reader from APS, in a
session or Animal table. The VID is displayed above the Big ID box
on the Reader screen and the EID is displayed below it, when the
tag is read. The numbers in the Big ID screen will be part of the
EID or VID depending on your Tag Display setup.
Big ID on display
If there is a cross-reference table that provides the VID for the
scanned animal, you will see both the EID and VID on the screen.
The Big ID fi eld can be confi gured to show the VID or EID. It can
be used to highlight the part of the VID or EID that is most
signifi cant to you.
To Setup the Big ID fi eld
Full animal VID
EID tag type
1. From the Main Menu, select
2. Using the arrow keys make fi eld selec ons.
Digits
EID or VID
Off set
Tag Prefi x
3. Press the
12
The number of digits (from 3 to 10) are shown in large
type
Indicates which ID is displayed in the Big ID box
Determines the number of digits from the right of the VID
that are ignored for the large digit display (only for VID).
Enter the Tag VID prefi x. (Press OK to select this fi eld, then
ABC to access alpha characters.)
Return
key to exit to Main Menu and save changes.
Big ID
Full 16 digit EID
Tag Display icon OK
and press .