English | 9 - Burg Wächter CONTROL 2110 Notice D'installation Et D'utilisation

Pairing sensor with Base
1. Start App.
2. Expand menu "Dashboard"
"Add Accessory"
3. Scan the QR code, printed on this
accessory.
4. The APP will auto recognize this accessory
and add it to your list. Rename it with a
perspicuous name, which says you the
exact location
of the sensor in case of alarm,
e.g. „Bathroom".
5. Test Alarm function e.g. by triggering
an SOS alarm.
CONTROL 2110
–>
–>"Scan QR Code"
Battery replacement instructions
1. Using a coin, turn the battery cover
slightly counterclockwise.
2. Remove the used battery and replace with
1× CR2032 battery with the plus (+)
symbol facing down.
3. Close battery cover by slightly
clockwise turn.
Correct location for installation
The radio signal of the sensor is highly
dependent on environmental conditions.
Metal objects, concrete surfaces, walls, and
metal cables all reduce its range, etc. Other
radio devices and environmental conditions
can also interfere with its operation.
IMPORTANT NOTE: The alarm can only
work as well as permitted by its
installation and environment. The alarm
can indicate dangerous situations but
it cannot prevent them.
The device must not be painted, varnished
or altered in any way.

English | 9