FS WR-AX1800 Guide De Démarrage Rapide page 6

1. Power on your original and new routers.
2. Connect the WAN port of the original router to a LAN port of the new router using an Ethernet
cable. After the LED indicator of the new router blinks fast for 8 seconds, the PPPoE user name and
password are imported to your new router.
3. Remove the original router.
TIPS:
This function is only applicable when the connection type of the original router is
PPPoE, except for PPPoE of some special ISPs or PPPoE connection set up manually with
VLAN information.
Step 2: Connect the WAN port of the router.
WAN
Reset WPS
1. Ensure that the router is powered on.
2. Connect the router's WAN port to the LAN port of your modem or the Ethernet jack using an
Ethernet cable. The LED indicator blinks fast for 3 seconds.
WAN 1 2 IPTV/3 POWER
Ethernet cable
Power source
Or
Internet
5