3. GUARANTEE
Contact your distributor to find out its guarantee terms.
All FANELITE appliances are guaranteed against manufacturing and parts defects insofar as they are work-
ing under normal operating conditions. Our appliances must be installed by qualified professionals in accor-
dance with the regulations in force and the instructions given in these operating and assembly instructions.
FANELITE reserves the right to apply or not the guarantee in case of negligence of the customer, defective
installations, poorly adapted or not in conformity with the regulations in force.
Any damage related to any of the following points can not be taken into consideration and covered
by our guarantee :
- Defects of supervision, maintenance and maintenance.
- Maintenance due to normal wear and tear.
- Maintenance of the product not in accordance with the instructions of the manual.
- Any adaptation of the product that would be necessary for compliance with the technical or safety standards
applicable in a country other than that for which the product was originally designed and manufactured.
- Use or installation that does not conform to the use for which the product is intended or to the technical or
safety standards in force in the country where it is used.
- Non-observance of instructions, safety precautions and instructions stipulated in the manual.
- A case of force majeure, sinister (fire, flood, etc.), lightning, etc.
- A modification or repair of the product not carried out by a qualified professional.
- Use of parts and accessories not compatible with the product or defective.
- Immediate or delayed damages resulting from improper handling during transport, mishandling, falling,
shock, contact with water, sand or any other substance, etc.
- Improper treatment of the product due to inappropriate environment (poor aeration, exposure to moisture or
strong heat, vibration, non-adapted power supply, surge, etc.).
Whether with respect to the purchaser, installer or any other person, our company cannot under any
circumstances be held liable for any physical or material damage of any kind whatsoever, which may
be caused by our products or which would be the direct or indirect consequence of the use of our
products.
4. NOTES
In most houses, the ceiling fan is placed in the center of the room, replacing a light. In this way, the ceiling fan
provides evenly distributed airflow throughout the room.
Since a ceiling fan typically requires no more power than a light, the existing electrical circuit should not be
overloaded. But if the ceiling fan is equipped with lamps, make sure the electrical circuit is strong enough to
support the load. If this is not the case, you will need to install a new circuit with a new circuit breaker on the
main electrical panel or an auxiliary panel so that the ceiling fan has its own circuit without powering any other
device. If there is no central light in the room, you will need to define a location where the ceiling fan will be
21