Thermal Cut-Out Reset; Cleaning, Care And Maintenance - Buffalo CL205 Mode D'emploi

UK
6. Connect to the mains power supply and turn the temperature control knob on. The power indicator
light illuminates.
7. Set the Temperature Control knob to maximum to boil the water. The power indicator light illuminates
and the appliance heats the water.
8. When not steaming food the temperature control knob can be lowered to keep the water warm and
reduce heating times.
WARNING: If the Temperature Control Knob is set to maximum then the
appliance will constantly heat the water until the Temperature Control Knob is
turned Off or the temperature is reduced.

Thermal Cut-Out Reset

This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels
the appliance will automatically cut power.
The Safety Cut-out switch resets automatically. To reset the appliance:
1. Disconnect from mains power supply, empty the appliance and allow to cool.
2. The appliance is now reset and can be used as normal.

Cleaning, Care and Maintenance

• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior and interior of the appliance, and the steamer
basket.
• Dry thoroughly after cleaning.
De-scaling
In hard water areas lime scale can build up within the appliance after prolonged use. To de-scale the
appliance:
1. Pour a solution of de-scaler and water into the appliance.
2. Brush the interior gently with a soft bristled brush.
3. Discard the solution collected in the appliance.
4. Fill the appliance with clean water and turn back On to flush out the system. Flush out the system
thoroughly to remove any de-scaler residue.
5. The appliance is now ready for use.
Note: Use a suitable de-scaler and always follow the instructions on the
container.
Buffalo recommend that this appliance is de-scaled every month or more
frequently in hard water areas.
4
CL205_UK+FR_A5_v3_20190827.indb 4 2019/8/27 15:21