PCM VTF1510 Mode D'emploi page 2

English
1. To fix the tool holder to the machine, use
the pins for the positioning.
Then tighten the 4 screws of fixations
(Important, make sure that the screws
have the same strength of tightening).
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
Mode d'emploi
Operating instructions
Betriebsanleitung
Istruzioni per l'uso
VTF1510
2. Then tighten lightly the fixing screws
(important, make sure that the screws have
the same clamping force).
PCM WILLEN SA
SWISS MADE
Copyright © PCM Willen SA.
Garant:
RBT
Validation : 30.01.2014
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email: office@pcm.ch
Document :
VTF1510 . Mode
d'emploi
Page : 2 de 4