Calex PyroEpsilon Série Guide De L'opérateur page 3

1000
ACCESSORIES
A range of accessories to suit different applications and industrial environments is available.
These may be ordered at any time and added on-site. The accessories consist of the
following parts.
Fixed and adjustable mounting brackets
OPTIONS
The following options are available. Options are factory installed and may only be ordered at
the same time as the PyroEpsilon sensor.
Air/water cooled housing
OPTICAL CHART
The optical chart below indicates the nominal target spot diameter at any given distance from
the sensing head and assumes 90% energy.
Distance: Sensor to object (inches)
4
0
2.4
0.5
D:S 2:1
11.9
61.9
111.9
0 100
Distance: Sensor to object (mm)
PE21
INSTALLATION
The installation process consists of the following stages:
Preparation
Please read the following sections thoroughly before proceeding with the installation.
PREPARATION
Ensure that the sensor is positioned so that it is focused on the target only.
Certificate of calibration
8 0 19.7
4.4
1.8
0.5
D:S 15:1
11.9
45.2
200 0 500
PE151
Mechanical installation
Target greater
than spot size
Target smaller
than spot size
M16 x 1mm
12
103
Air purge collar
39.4 0 19.7
3.1
1.1
0.5
D:S 30:1
11.9
28.6
78.6
1000 0 500
PE301
Electrical installation
Sensor
CORRECT
INCORRECT
Background
18
Laser sighting tool
Longer cable (30 m max.)
39.4 0 3.9
1.8
0.5
0.20
5.0
11.9
45.2
1000 0 100
PECF
7.9
0.49
12.5
200
3