Télécharger Imprimer la page

Calex PyroEpsilon Série Guide De L'opérateur page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PyroEpsilon non-contact infrared sensors measure temperatures from -20°C to 500°C and
provide a linear 4 to 20mA output. This output signal is compatible with almost any indicator,
controller, recorder, data logger etc., without the need for special interfacing or signal
conditioning.
The sensor's emissivity setting can be adjusted from 0.2 to 1.0 to cope with different target
materials and is controlled by a 4-20 mA input. This gives the opportunity to adjust the
emissivity setting automatically from a programmable logic controller (PLC). Alternatively the
emissivity setting can be adjusted manually using the optional PyroTune module. If the 4-20
mA input is left open or short-circuit, the emissivity setting defaults to 0.95.
PYROEPSILON SPECIFICATIONS
Model Numbers
Field of View
2:1
15:1
30:1
ø5mm @ 100mm
Output
Accuracy
Repeatability
Emissivity
Response Time
Spectral Range
Supply Voltage
Min. Sensor Voltage
Max. Loop Impedance
Input Impedance
Construction
Dimensions
Thread Mounting
Cable Length
Weight with Cable
Environmental Rating
Ambient Temperature Range
Relative Humidity
PYROTUNE SPECIFICATIONS
Output
Supply Voltage
Display Format
Display Units
Adjustment
Construction
Mounting
Dimensions
Weight
Environmental Rating
Ambient Temperature Range
Relative Humidity
2
-20ºC to 100ºC
0ºC to 250ºC
PE21LT
PE21MT
PE151LT
PE151MT
PE301LT
PE301MT
PECFLT
PECFMT
4-20 mA
±1% of reading or ±1ºC whichever is greater
± 0.5% of reading or ± 0.5ºC whichever is greater
0.2 to 1.0 via 4-20 mA input
240 ms (90% response)
8 to 14 μm
24 V DC (28 V DC max.)
6 V DC
900 Ω ( 4-20 mA output)
50 Ω
Stainless Steel
18 mm diameter x 103 mm long
M16 x 1 mm pitch
1 m
95 g
IP65
0ºC to 70ºC
95% max. non-condensing
4-20 mA
24 V DC (13 V to 28 V DC)
3.5 digit LCD
Emissivity (0.2 to 1.0) or current (4 - 20 mA)
Push-buttons (raise/lower/set)
Polycarbonate with gasket, transparent lid (PC) and quick
release screws
Surface
65 mm tall x 50 mm wide x 35 mm deep
72 g
IP65
0ºC to 70ºC
95% max. non-condensing
0ºC to 500ºC
PE21HT
PE151HT
PE301HT
PECFHT

Publicité

loading