Technical Data; Introduction; Safety Regulations - B+BTec Diamond 3 405 TS Manuel D'utilisation

GB

1. TECHNICAL DATA

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 TS . . . . . . . . . 406 TS
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 HP . . . . . . . . . . . . 3 HP
Saw spindle speed . . . . . . . . . . . . . . . . . . . . . . 2.800 RPM . . . . . . . . 2.800 RPM
Blade diameter/hole . . . . . . . . . . . . . . . . . Ø400/25,4 mm . . . . Ø400/25,4 mm
Saw height single cut . . . . . . . . . . . . . . . . . . . . . . 125 mm . . . . . . . . . . 125 mm
Saw height double cut . . . . . . . . . . . . . . . . . . . . . . 160 mm . . . . . . . . . . 160 mm
Sawing length . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mm . . . . . . . . . . 600 mm
Saw table dimensions . . . . . . . . . . . . . . . . . .475 x 400 mm . . . . . 475 x 500 mm
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .060 mm . . . . . . . . .1 .240 mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 mm . . . . . . . . . . 600 mm
Height (without legs) . . . . . . . . . . . . . . . . . . . . . . 1 .280 mm . . . . . . . . .1 .280 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 kg . . . . . . . . . . . . 76 kg
Noise level . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 dB (A) . . . . . . . . . 89 dB (A)
Noise level during sawing . . . . . . . . . . . . . . . . . . .98 dB (A) . . . . . . . . . 98 dB (A)

2. INTRODUCTION

This sawing machine is designed and
intended for the professional contractor .
The machine is equipped with a height
adjustable saw head . The movable saw-
ing table has 4 ball bearing guide rollers
for precise and easy cutting feed . Through
continuous supply of cooling water the cut-
ting quality is improved and the wear on
the saw blade is minimized. The cooling
water also absorbs the saw dust .
The quality and construction of this sawing
machine meet the highest standards . The
design is based on longevity and minimal
maintenance .
DIAMOND3
405TS-406TS
®

3. SAFETY REGULATIONS

1 The sawing machine is only to be used
for sawing sandstone, concrete prod-
ucts and natural stone .
2 Only saw blades advised by the manu-
facturer should be used .
3 Check the following before starting
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centred correctly)
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water .
4 During sawing the material to be cut
should not be tilted or moved .
5 During sawing with this sawing
machine the max . sound pressure level
is exceeded .
Because the max. sound pressure
level is exceeded during opera-
tion wearing hearing protection
is mandatory.
16