Publicité
Les langues disponibles
Les langues disponibles
Garment brush (10)
Garment brush can be hung from the hanger on the upright pole for steaming. Set pole to required height using the
extension sections (part 19).
To use:
Assemble the upright pole to the required height and insert into the support on the back of the
steamer.
Tighten the collar on the support to secure the pole.
Using a coat hanger, hang garments on the hook on top of the pole.
Attach the garment cleaning attachment to the steam gun and add the required cleaning part if needed.
Note: If using the cleaning adapter, please ensure one of the small cloth covers is placed over
the steam head.
When not in use, you can hook the brush into the holster as illustrated to the right.
Filling with water
1. Lift the handle as shown.
2. Remove the water tank from the steamer completely.
3. Make a note of the date of opening on the red label stuck onto the filter.
Filter should be replaced each year.
4. Insert filter into the steamer as shown.
Note:
After using when first time or not using it for a long time, please spray a
jet steam for 2-5 minutes.
If there is a build-up of sediment or limescale in the filter or steamer, simply
spray a jet pf steam through the gun for 2-5 minutes to clean.
Ensure that the stabilizer is screwed down to the floor, as shown
to the left, in order to prevent the machine from tipping when
garments are hanging on the steamer.
5
Publicité
