Télécharger Imprimer la page

Eco Steam Buddy Mode D'emploi page 13

Publicité

Les langues disponibles

Les langues disponibles

Usage Instructions:
Using the Attachments:
Extension tubes (17)
Use these tubes for extending the nozzle on the steamer as follows:
Round brushes (12,13,14)
Three round brushes are supplied with the product (parts 12, 13, 14). Both black nylon brushes are suitable for cleaning
difficult-to-access spots or gaps. The wire brush is suitable for highly dirty places.
Floor attachment (21)
You can use the floor attachment with or without cloths. We recommend that the cloth covers be used for cleaning hard
floors and no cores for carpets, rugs, etc.
To do this:
1. Attach the extension tubes as described above.
2. If needed, fit the cloth cover over the head and ensure it is secure using the clips, as
Note: Any cloth can be fitted to the cleaner head, not just those supplied with the machine.
Window attachment (9)
1. If required, assemble the extension tubes and fit the glass cleaning attachment as shown in
2. Apply steam to the windows and wipe clean with the rubber squeegee on the head.
IMPORTANT: To prevent glass cracking; never steam clean windows on a cold day.
1. Press and hold the button on the gun (part 20) and attach one extension
tube (part 17). Slide on the extension tube until it clicks into location.
2. If you wish to use one more extension tube, repeat using the button on the end of the
first extension.
Take care not to damage surfaces when using the abrasive wire brush!
To attach a brush:
1. Press and hold the button on the gun (part 20) and attach the nozzle (part 18) to the gun
until it firmly fits into position.
2. Screw the desired brush attachment onto the nozzle.
Note: The nozzle can be used without brushes and will give concentrated, high-pressure jet
of steam for stubborn stains.
shown on left picture.
Simply use the clamps on top of the head to secure.
the diagram opposite.
4

Publicité

loading