HumanTechnik RadioLight DIR Mode D'emploi page 14

- Positioning of the transmitter at an unfavourable distance
from surfaces which reflect radio waves, for example floors
and walls. This may lead to the signal wave being weakened
or even cancelled out by the reflected wave.
- Metallic objects reduce the range due to the shielding
effect of the metal.
- Particularly in towns and cities, there may be many other
sources of radio waves which can disrupt the original signal.
- Having units operating at similar frequencies located close
to one another may also result in mutual interference.
Channel selctor
4
With the channel selector you can change the frequency of the trans-
mitter. If channel A is distorted you can change to another channel.
By pressing the Auto-tune button (backside of receiver) the receiver
adjusts itself optimally to the transmitter. The Auto-tune button should
be pressed when the sound quality becomes badly distorted.
14 english
Note: If you change the
channel please press the
Auto-Tune button of the
receiver.