Publicité
Les langues disponibles
Les langues disponibles
11
Option C
(see fig.3)
For use with multi-channel amplifiers, receivers or processors equipped with
two low-level subwoofer (or LFE) outputs.
The connectivity method is the same as Option B, but a Y-splitter is not
required. Connect the low-level left subwoofer output to the left Power Tower
UK
and the low-level right subwoofer output to the right Power Tower using the
supplied cable.
Connect the centre channel loudspeaker to the centre channel loudspeaker
output, and the surround loudspeakers to the surround loudspeaker outputs
of your amplifier or receiver.
Important Note: If your surround amplifier, receiver or processor has
integral bass management circuitry, ensure that your front left/right, centre
and surround channels are set to 'Small' and that the subwoofer outputs
are enabled for both two-channel and multi-channel listening. Suggested
crossover options are 80Hz and 100Hz. Select the 'Stereo' subwoofer output
option if one is available. Please refer to the documentation supplied with
your amplifier, processor or receiver.
Fig.3
Publicité
