Technical Data; Ec-Declaration Of Conformity - Batavia MAXXPACK BT-CAG001 Mode D'emploi

English
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap. Do
not use any cleaning or solvent materials;
these can attack the device's plastic com-
ponents. Make sure that no water can get
inside the electric power tool.

TECHNICAL DATA

Speed . . . . . . . . . . . . . . . 8000 min
Grinding disc diameter . . . . . . . Ø 115 mm
Drive shaft thread. . . . . . . . . . . . . M14
Weight . . . . . . . . . . . . . . . . . 1.78 kg
Sound Pressure Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
pA
Sound Power Level L
WA
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration
Handle . . . . . . . . . . . . . . 3.827 m/s
Auxiliary Handle . . . . . . . . . 3.506 m/s
Uncertainty K . . . . . . . . . . . . . 1.5 m/s
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do
not dispose of batteries with domestic refuse.
Do not dispose of by burning, risk of explosion.
16
. . . . 76.67 dB(A)
pA
. . . . . .87.67 dB(A)

EC-DECLARATION OF CONFORMITY

We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare by
our own responsibility that the product Cord-
less Angle Grinder, Model BT-CAG001,
Item-No 7062512 is according to the basic
requirements, which are defined in the Euro-
pean Directives Electromagnetic Compatibility
2014/30/EU (EMC), 2006/42/EC (Machinery),
2011/65/EU (RoHS) and their amendments.
For the evaluation of conformity, the following
harmonized standards were consulted:
EN60745-1:2009+A11
EN60745-2-3:2011+A2+A11+A12
EN55014-1:2006/+A1:2009/+A2:2011
EN55014-2:2015
Staphorst, 04 April 2017
-1
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
2
2
2