Grundig FILM SCANNER Mode D'emploi page 5

Cleaning the dust from the film scanner lens:
Open the PhotoImpression 6 software as if you were about to convert a picture.
Do not insert any slides or negatives into the film converter slot. You will be able to see the dust that is
on the lens from the PhotoImpression 6 live view window. (See the example shown below) Then you
can use the cleaning brush to wipe the dust.
We strongly suggest using a clean, dry, non-alcohol cotton swab or the cleaning brush that is included
with your unit to insert into the film scanner slot and clean the glass surface periodically to produce a
clear image.
3. Installing the software and driver
To use the film converter you must install the film converter driver and ArcSoft PhotoImpression 6 in
advance.
• Installing the driver.
1. Turn on the computer.
2. Insert the installation CD into the CD-ROM drive and the
installation CD menu will appear.
3. When you see the following screen, choose "Scanner Driver".
Windows XP directions:
3.1. Click Next to start the installation process. 3.2. Click Install.
38295 manual.indd 5 02-07-2010 13:50:09