Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. Maintenance
8.1. Differential pressure gauge
If the accuracy of the differential pressure gauge is out of
range(siehe chapter 4.) the differential pressure gauge must
be calibrated new.
Send in complete pressure-test kit on:
Ademco 1 GmbH
Hardhofweg 40
74821 Mosbach
10. Troubleshooting
Disturbance
Cause
No or insufficient
Differential pressure gauge faulty
gauge in the diffe-
Hoses connected incorrectly
rential pressure
Wrong adapter fittings are installed
gauge
Hoses faulty
Needle valves or bleed valves faulty
Filters in the hoses are contaminated
or worn
GB
9. Disposal
The pressure-test kit consists of:
Red-bronze, brass, steel, plastic
Observe the local requirements regarding correct
waste recycling/disposal!
Remedy
Call Technical Customer Service
Connect hoses correctly (consider figures)
Install correct adapter fittings
Check hoses for bends and if necessary replace
Check or replace needle valves or bleed valves
Replace filter
7
MU1H-1227GE23 R0321
Publicité
Table des Matières
