6 M I N I N T; L U M I N O S I T Y C H - tecatlantis LUMINUS Notice D'utilisation

T I M E O F F
1 6 : 5 3
T I M E O F F
1 6 : 5 3
R A M P O N
1 6 M I N
R A M P O F F
1 6 M I N
L U M I N O S I T Y
1 0 0 %
E N A B L E
Y E S
CHECK IF THERE IS A TIME COLLISION BETWEEN
If there is no collision
S U C C E S S F U L L Y
I N S E R T E D
AFTER 1 SECOND
C O N F I G U R A T I O N
E N D
AFTER 1 SECOND
C O N F I G U R A T I O N
E N D
Storm Function
Simulates in the luminaires the effect of a storm with three different phases:
Darkness (10min), Pseudo random flashes (30min) and Back to normality
(10min). It is only possible to activate/deactivate the Storm function
through the mobile Apps for Android and iOS. Activate this function while
changing the water of the aquarium can produce breeding behavior in
certain species.
: C H 1
I N T 2
MENU
: C H 1
I N T 2
OK
: C H 1
I N T 2
OK
: C H 1
I N T 2
OK
: C H 1
I N T 2
OK
I N T : C H 1
I N T 2
INTERVALS IN THE SAME CHANNEL
Select the hour to finish the
fade-out ramp (hour
adjustable from 0 to 23).
Select the minute to finish
the fade-out ramp of the
luminaire (hour adjustable
from 0 to 59).
Select the duration of the
fade-in ramp of the
luminaire, in minutes
(adjustable from 10 to 90).
Select the duration of the
fade-out ramp, in minutes
(adjustable from 10 to 90).
Select the light intensity
during the interval
(adjustable from 0 to 100).
Activate or deactivate the
configured interval until
this step: UP selects YES to
active, DOWN selects NO to
deactivate.
In case of collision
E R R O R I N T E R V A L
O V E R L A P
If there is a collision with
another interval of the
selected channel, all the
parameters of that interval
are saved, but the interval
stays inactive.
End of Setup – The
controller returns to the
Main Menu saving the
configured parameters.
EN
14