PLYMOVENT ERC Manuel Opérateur page 8

4. Mount the end sockets, exhaust fume connection can be done
either at the end socket adapter or at a seperate socket adap-
ter on a suitable place along the top of the rail.
5. Attach inner arm to outer arm by means of
hinged joint and fit rubber collar to inner arm.
6. Release swivel joint from wall mounting bracket.
7. Mount swivel joint to the inner arm.
NoTE! WAShEr.
8. Attach the inner arm to the
KUA-crab by using 4 pcs
M6x25 and 4 pcs M8x25.
181113/0 ERC
NoTE!
EN - 7
ERC/7/9