I-O DATA LCD-A15V/U Manuel De L'utilisateur page 29

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Let's Install
Mounting on an Arm
Mounting on an Arm
Mounting on an Arm
Mounting on an Arm
It is possible to remove the pedestal and mount the monitor on a fixture
device such as an arm conforming to the VESA standard. Prepare an arm
and appropriate screws for mounting the monitor on the arm.
・ ・ ・ ・ Please be extra careful while mounting the monitor on the arm, taking care not
Please be extra careful while mounting the monitor on the arm, taking care not
Please be extra careful while mounting the monitor on the arm, taking care not
Please be extra careful while mounting the monitor on the arm, taking care not
to drop the liquid crystal display monitor on the floor or damage the panel.
to drop the liquid crystal display monitor on the floor or damage the panel.
to drop the liquid crystal display monitor on the floor or damage the panel.
to drop the liquid crystal display monitor on the floor or damage the panel.
・ ・ ・ ・ Place a soft cloth underneath so that the liquid crystal display monitor is
Place a soft cloth underneath so that the liquid crystal display monitor is
Place a soft cloth underneath so that the liquid crystal display monitor is
Place a soft cloth underneath so that the liquid crystal display monitor is
not damaged.
not damaged.
not damaged.
not damaged.
・ ・ ・ ・ Turn
Turn off
off the power supply and
Turn
Turn
off
off
・ ・ ・ ・ Please refer to the instruction manual of the fixture device you
Please refer to the instruction manual of the fixture device you have
Please refer to the instruction manual of the fixture device you
Please refer to the instruction manual of the fixture device you
Remove all the covers from the rear of the device.
Remove the pedestal.
Remove screws (four locations).
22
Caution!
the power supply and remove the cable
the power supply and
the power supply and
remove the cable before starting to work.
remove the cable
remove the cable
Remove screws
Remove screws
Remove screws
Remove screws
( ( ( ( four locations)
before starting to work.
before starting to work.
before starting to work.
have prepared.
have
have
four locations). . . .
four locations)
four locations)
prepared.
prepared.
prepared.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lcd-a15v/e

Table des Matières