INTERTECHNO ITL-2300 Mode D'emploi page 21

GB
Operating instructions
ITL-2300
In addition, the wireless-mini-insert switch ITL-2300 has a storage feature
for scene switching.
Refer to the respective transmitter's instruction manual (e.g. ITF-100,
ITKL-30) for details on scene switching.
Multiple wireless receivers can be changed to the desired switching state
with the touch of a single button.
e.g: Ceiling light OFF/Fan ON/Floor lamp DIMMED
Erasing individual codes:
Proceed as in points 4.) and 5.),
but press the OFF button instead of the ON button.
Erasing all codes:
Press the learn button (L) for around 6 seconds until the LED begins to
flash.
Briefly release the button and then press the learn button (L) again.
The LED will flash 3x as confirmation of the delete process.
No transmitters are required for this process.
To view the Declaration of Conformity, please visit
www.intertechno.at/CE