Table des Matières
Publicité
Manuel d'installation
WATER HOSE No
1
2
CONNECT END OF HOSES TO RUGGED HOUSING
WATER INLET & OUTLET CONNECTIONS AS SHOWN
WATER CONNECTION DETAILS
BARBED HOSE OD 9.5mm (0.375") or 804207 1/8 BSP to
9.5 (3/8") AS SUPPLIED.
IF REMOVED REQUIRES
FITTINGS WITH G1/8" (1/8"BSP) MALE THREAD.
ANY ALTERNATIVE FITTING MUST HAVE A 7mm BORE
SUPPLIED BY
CUSTOMER
CUSTOMER
SECURE WITH SUITABLE CLIP
1
Figure 12 Détails du raccordement de l'eau
Système d'imagerie thermique fixe
DETAILS
TO SUIT 9.5mm (3/8") OD BARBED HOSE FITTING
TO SUIT 9.5mm (3/8") OD BARBED HOSE FITTING
RUGGED HOUSING
2
WATER
WATER
OUT
IN
NOTE:
FLOW CAN BE REVERSED
ALWAYS USE FLEXIBLE PIPING TO ALLOW
PAN AND TILT MOVEMENT.
NOTE
WATER pH LEVEL MUST
BE WITHIN 5-8pH.
Section 2
Page 2 - 13
Publicité
Table des Matières
