abc home living 25700 Manuel D'instructions page 12

Mode Selection(Secondary Menu)
At default interface, keep pressing button D(MENU) to select Mode Selection, it's displayed "Mode" as following:
Press OK button to access Mode menu. Press button E(+) or F(-) to select the desired mode.
1)
Open Window Detection Mode
Keep pressing button D(MENU) to select Mode menu. Press OK to validate, then E(+) or F(-) to access Open Window
Detection Mode. The screen show "OPEN" as following:
Press OK to validate, then button E(+) or F(-) to select ON or OFF. Press OK button to turn on or turn off the Open
Window Detection Mode.
After activate the Open Window Detection, the appliance will automatically shut off the heating when it detects the
room temperature decreased more than 4°C in 10 minutes and maintain the decreased temperature not less than 20
minutes. To restart the heating, adjust the set temperature then press OK button to validate the setting. The Open
Window Detection Mode will be OFF after reset the temperature.
2)
Time Setting
Keep pressing button D(MENU) to select Mode menu.
Press OK to validate, then button E(+) or F(-) to access Time Setting. It's displayed "TIME" as following:
Press OK to validate, then button E(+) or F(-) to select day, D1 for Monday, D2 for Tuesday, D3 for Wednesday, D4 for
Thursday, D5 for Friday, D6 for Saturday and D7 for Sunday.
Press OK to validate the day, then button E(+) or F(-) to set time(hour).
Press OK to validate the hour, then button E(+) or F(-) to set time(minute).
Press OK to validate the time setting. To exit the setting during operation, press button D(MENU).
If icon permanently flashes, this indicates that the time is offset following a power cut. It's flashing as a time has
not been set.
3)
Weekly Programming
The time must be set before any programming.
3 pre-set programs are available. Each program includes a time period or several time periods during which the
electric fireplace is under heating mode. Outside of the time periods, the electric fireplace is non-heating.
The time period of one program may overlap the time period of another.
Program Definition:
P1 as Program 1:
Monday to Friday from 05:15 for 4 hours high heating, and Saturday to Sunday from 06:20 for 4 hours low heating.
P2 as Program 2:
Monday to Friday from 17:45 for 4 hours high heating, and Saturday to Sunday from 16:30 for 4 hours low heating.
P3 as Program 3:
Saturday to Sunday from 08:15 for 4 hours high heating.
Keep pressing button D(MENU) to select Mode menu.
GB4