abc home living 25700 Manuel D'instructions page 11

LOW/HIGH HEATING & SETTING THE TEMPERATURE
High Heating
At default interface, press button D(MENU) to display H and flashing heating icon as following:
Press OK button to set temperature. The default temperature is 10°C(50°F). It's displayed as following:
Press button E(+) or F(-) to adjust temperature. If the set temperature is higher than the room temperature
detected by appliance, the heating starts. The heating will not start if the set temperature is lower than the room
temperature.
Low Heating
At default interface, press button D(MENU) twice to display L and flashing heating icon as following:
Press OK button to set temperature. The default temperature is 10°C(50°F). It's displayed as following:
Press button E(+) or F(-) to adjust temperature. If the set temperature is higher than the room temperature detected by
appliance, the heating starts. The heating will not start if the set temperature is lower than the room temperature.
Celcius/Fahrenheit Setting:
The default temperature readout is Celcius. Long press button D(MENU) for 3 seconds then press button E(+) or F(-)
to change the temperature readout from Celcius to Fahrenheit.
Brightness Control
Brightness Control is to select the desired flame brightness level. At default interface, keep pressing button D(MENU)
to select the Brightness Control, it's displayed "bri" and flashing light bulb icon as following:
Press OK button to start the brightness setting. Press button E(+) or F(-) to select the brightness level.
5 brightness levels are selectable. Default setting is 3. 5 is the highest level as shown following:
Regular Timer
At default interface, keep pressing button D(MENU) to select the regular timer, it's displayed "Hour" and flashing timer
icon as following:
Press OK button to start the regular timer setting. Press button E(+) or F(-) to select the desired time.
The time sequence will read 00-30min, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H and 9H. The default setting is 00 as shown
following:
GB3