DigiTech 4-LD0305 Mode D'emploi page 7

Possible sources of interference:
If your clock has not set itself automatically after
approximately 3 minutes have elapsed, something must
be interfering with the radio signal. Please repeat the
setting process after bringing the clock to a different
location.
The setting procedure will only be delayed in cases of
extremely bad reception, caused by heavy building
insulation (metal building materials) or atmospheric
interference.
Household causes for interference can be found in
appliances where interference has not been eliminated,
most commonly televisions and personal computers.
Your radio controlled clock cannot receive the radio
signals in the vincinity (ca. 2m) of televisions that are
turned on.
In the interest of undisturbed reception, your radio
controlled clock should not be set up near possible
sources of interference.
Time setting
Press and hold MODE for 3 sec., the hour digits will blink
and can be set using the UP
Press °C/°F to select 12 or 24 hour mode.
Press MODE , the minute digits will blink and can be
set using the UP or DOWN
Press MODE , the year digits will blink and can be set
using the UP or DOWN buttons.
Press MODE , the month digits will blink and can be set
UP DOWN
using the or buttons.
Press MODE , the date display will blink and can be set
using the UP or DOWN buttons.
Press MODE to return to normal time mode.
Calendar
To change the weekday display among english,
german and italian press and hold the
for 3sec.. An abbreviation for the language will appear:
EN for english, GE for german, FR for french, IT
for italian, SP for spanish, DU for dutch
Foreign Time Display
Press and hold UP for 3 sec. to access the 2nd time
zone display. The "F" symbol will appear.
Press and hold UP for 3 sec. to return to normal time.
Setting Foreign Time
While in foreign time mode, press and hold
3sec.. The hour digits will be blink and can be set with
UP and DOWN .
Press MODE to get to the 2nd time zone.
or DOWN buttons.
buttons.
DOWN button
MODE for
Temperature
Press the C / F button to set the temperature diplay to
°Celsius or °Fahrenheit.
Battery Level Indicator
If the battery charge drops below the level necessary
for operation of the clock, the battery indicator will light
up. The battery should be replaced as soon as
possible.
Moonphase
Your clock will display the following moon phases:
Symbol Meaning
Full Moon
Waning gibbous
Last Quarter
Waning Crescent
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Warranty
This product has a 3 year warranty. The warranty
period starts on the day of purchase (sales receipt).
Within this period we repair any defects due to material
or production fault free-of-charge. This does not
include batteries. For any defects which are due to
improper use, for example in cases of dropping, hitting,
contact with water, the right to claim under warranty
ceases to apply.
Free service hotline:
www.inter-quartz.de
TEL: 00800 5515 6616
digi-tech ®, Valterweg 27A, DE-65817 Eppstein