Safety Regulations; Disclaimer - ELECTOR DigiFlux Manuel De L'utilisateur

DigiFlux – Digital water meter

1.4 Safety regulations

Installation and commissioning of the device may only be carried out by specialist personnel.
The manufacturer's instructions must be followed for maintenance or replacement of the device's
consumables.
The manufacturer's warranty is void if the device is modified.
The manufacturer accepts no liability for damage caused by improper commissioning. It also
voids the warranty.
The measuring device must not be operated in potentially explosive areas.
The measuring device may only be put into operation if it is in perfect condition.
The measuring device may only be operated in aqueous solutions with a pH value of 4 - 12. Use
in concentrated acids and alkalis is not permitted.
Check the device for possible damage before commissioning.
The intended use within the performance limits must be ensured.
Before carrying out any repair work, the device must be disconnected from any operating
pressure and the power supply must be removed.
Damaged devices must be taken out of operation immediately. Have defective or damaged
devices repaired only by specialists authorized by the manufacturer. It is in your own interest.
They thus prevent defective repairs.

1.5 Disclaimer

Use must be carried out exactly as described in this manual. The manufacturer is not liable for
any damage, including consequential damage, that may result from incorrect installation or
incorrect use of the product.
Page 11 www.elector-water-treatment.com