Memory Card Operation; Disc Notes - Vieta Car VC-HA920BT Mode D'emploi

When playing the MP3/WMA files in the device, the
operation is the same as with the MP3 operation
described above.
Note→
- The main unit can only support the standard USB-
memory device.
- USB MP3 player is not a standard which means
different brand name or different models have their
own standard. So our product cannot support all
MP3 players.
- When connecting an MP3 player and it has normal
batteries in the player
(non rechargeable battery), you should remove
the batteries from the MP3 player then connect it to
the USB interface. Otherwise, it may damage the
batteries.
- When in USB play mode, be sure not to remove the
USB driver from the USB interface.

Memory Card Operation

There is a memory card interface (24) on the housing
the unit.
When you insert a memory card in the memory card
interface, the unit will search the MP3 files in the card
and start to play MP3 files automatically.
The operation is the same with the MP3 operation
described above. If in other mode, you can also
press MODE + button (13) to select memory card
play mode.
Caution
When there are important files in the USB device
or memory card, do not connect it to the main unit
to play. And don't play the CD-R/RW disc that has
important files in it. Because any wrong operation
may cause files loss. And our company assumes no
responsibility for this.

DISC NOTES

A. Notes on discs:
1. Attempting to use non-standard shape discs (e.g.
square, start, heart) may damage the unit. Be sure to
use round shape CD discs only for this unit.
2. Do not stick paper or tape, etc, onto the label side
or the recording side of any discs, as it may cause a
malfunction.
3. Dirt, dust, scratches and warping discs will cause
miss operation.
26
B. Notes on CD-Rs (recordable CDs)/CD-RWs
(rewritable CDs):
1. The unit cannot play a CD-R and CD-RW that is not
finalized. (Please refer to the manual of your CD-R/
CD-RW recorder or CD-R/CD-RW software for more
information on finalization process).
2. Depending on the recording status, conditions of
the disc and the equipment used for the recording,
some CD-Rs/CD-RWs may not be played on this unit.
(see *1)
*1: To have more reliable play back, please see
following recommendations:
a: Use CD-RWs with speed 1x to 4x and write with
speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x and write with
speed 1x to 2x.
c. Do not play a CD-RW which has been written for
more than 5 times.
C. Notes on MP3 files (MP3 Version Only):
1. The disc must be in the ISO9660 level 1 or level 2
format, or Joliet or Romeo in the expansion format.
2. When naming a MP3 file, be sure the file name
extension is ".MP3".
3. For a non-MP3 file, even though the file name
extension is ".MP3", the unit cannot recognize it.
Conexión del NFC
CD/USB/SD Android Radio
1. Check if the NFC function of your smartphone is
displayed ON.
2. Please set the NFC function of your smartphone
to ON.
3. When your NFC phone has been turned on, put
your phone near the volume knob of the CD player.
4. Maintaining smartphone near CD player volume
knob until the smartphone is connected, and the top
of the smartphone screen will appear CONN OK. At
this moment, the smartphone will emit a short beep
to confirm.→When the phone prompts for a PIN code,
enter the PIN code : 0000→
5. If you want to disconnect, also keep your
smartphone close to CD player volume knob until the
smartphone is disconnected, and the top of the
smartphone screen will appear DISCONN. The
smartphone will emit a short beep to confirm.
Note : NFC sensor chip is located in the volume
knob, so when you use the NFC feature, keep your
smartphone away from the volume knob preferably
not more than 5mm.
27
ENGLISH