Publicité
Les langues disponibles
Les langues disponibles
The following rights are reserved:
Any changes that are made to either the functionality or appearance of this product without
previous notice will invalidate the guarantee.
If this product is used in a different environment or different way than specified here, the guarantee
will also be invalidated.
Attention:
1. Please read this user manual carefully before using the product.
2. Never attempt to repair or modify this product or its accessories by yourself, to avoid injury and
invalidating the guarantee!
3. Any accidental factor such as being struck by lightning or incorrect operation could result in SD
card memory loss. Keeping copies of the videos is strongly recommended in case of memory
loss.We are not responsible for any loss of data.
4. DO NOT use any chemicals to clean this product, such as alcohol or benzene thinner.
5. Please change the batteries quickly when a low battery level is indicated, in order to avoid any
damage to this product which could be caused by battery weeping.
Package list:
1
3
5
7
Installation instructions:
1. Remove the existing door viewer or drill a 14 mm hole in the door at the required height and
insert the camera from the outside. Make sure that the washer is fitted between the camera
and the door. Ensure that the bell push is at the bottom and the camera is suspended
vertically. (FIG.1)
10/44
LCD Screen
4 AA batteries
Camera
Tightening tool
1 fixing screw
2
Holding plate
4
Locking barrel
6
Publicité
