Beha-Amprobe AM-555-EUR Mode D'emploi page 28

Function
F1 fuse, 0.5A H 1000V fast-fuse,
mA /μA
F2 fuse, 11A H 1000V fast-fuse,
A
[1] Frequency response: 45Hz to 1kHz
[2] Frequency (on secondary display) may not be displayed if the measured
current is below 20% of the display current range.
[3] 8 to 10 A up to 20 minutes, 10 minutes off minimum.
[4] >10 to 20 A overload for 30 seconds maximum, 10 minutes off minimum
[5] >10 to 20 A for 30 seconds accuracy ±(4%+5LSD).
8. Resistance Measurement
Range
600.0Ω
6.000kΩ
60.00kΩ
600.0kΩ
6.000MΩ
60.00MΩ
Open circuit voltage: Around 0.5V
Overload protection: 1000Vp
9. : Continuity
Range Resolution
0.1Ω
G
1mV
Overload protection: 1000Vp
Overload Protection
( 6.3×32)mm
(10×38)mm
Resolution
0.1Ω
1Ω
10Ω
100Ω
1kΩ
10kΩ
: Diode Measurement
G
Open circuit voltage is around -3V dc.
Resistance ≥50Ω, buzzer will not sound.
Resistance ≤10Ω, buzzer will sound.
Display range is 0V to 2.8V. Normal voltage is around
0.5V to 0.8V for silicon PN junction.
20 A overload for 30 seconds
maximum, 10 minutes off
±(1.2%+2 LSD)
±(1.0%+2 LSD)
±(1.2%+2 LSD)
±(1.5%+2 LSD)
Accuracy
22
Overload
N/A
minimum
Accuracy