Publicité
Les langues disponibles
Les langues disponibles
COMUNICATIONS
Connec on to GroNode
C
Make sure the GroNode is correctly installed
Make sure the GroNode is correctly installed
and accessible through the GroLab So ware,
and accessible through the GroLab So ware,
if not follow the instruc ons provided inside
if not follow the instruc ons provided inside
t
the GroNode's manual.
A er installing PowerBot, open the GroLab
A er installing PowerBot, open the GroLab
So ware, establish connec on with GroNode
So ware, establish connec on with GroNode
a
and then, access Modules through the main
m
menu.
Usually 2 or 3 minutes are enough for GroNo-
U
de to detect a newly installed module. A er
de to detect a newly installed module. A er
being detected, it automa cally appears in
being detected, it automa cally appears in
t
the Modules menu under the respec ve
module type sec on. You can check the list of
module type sec on. You can check the list of
modules of same type on the right side of this
modules of same type on the right side of this
m
menu.
Note that one GroNode supports a maximum
Note that one GroNode supports a maximum
o
of 4 modules of each type.
3
EN
ES
FR
n
-
e
12
Publicité
