Publicité
Les langues disponibles
Les langues disponibles
•
Line-in grabbing:
You can use this USB Pre Amp to rip a
Line-in signal from an audio device such
as CD
A. Connect the audio cable R,L → 3.5mm
to your CD player and USB preamplifier
as the illustration shows.
B. Take the USB A → mini 5 cable. Connect
your PC or notebook to the USB
preamplifier as the illustration shows.
•
If your audio device only supports 3.5mm stereo output:
A. Buy a 3.5mm → 3.5mm cable (not included), connect one end to the "Line In/Pre-Amp
Out" port on the USB preamplifier and the other to the 3.5mm output of your audio
device.
B. Set the slide position on the USB preamplifier to "Line In"
Operation:
A. Power on and play your audio device
B. You can now start to rip the audio to your PC or notebook
Trouble shooting:
1. If the computer does not detect the USB preamplifier
a. Please make sure the connection is correct.
b. Please re-connect the USB preamplifier to your USB port, and then check the auto-
detection function. (When the unit is detected, the LED light should be on)
2. What are the minimum system requirements?
A computer with an USB port and with 500mA powering capacity is sufficient.
3. Why is the Pre-Amp OUT not working?
a. Please make sure the connection is correct.
b. Please make sure the slide position is set to "Pre-Amp OUT".
4. What kind of recording program can I use?
Please use the existing recording program in your OS or try to download free audio
programs from the Internet.
PC
Pre-Amp
Out
USB
Front
BACK
MM
MC
4
CD Player
Line
In
Publicité
