Handling And Operation; Switch The Device On/Off; Display Charge Level - SilverCrest SPBS 5000 B2 Mode D'emploi

A rough estimate of the charge level is shown during charging by means of the
charge level LEDs
Charge level LEDs
One LED is flashing
One LED is on, the second LED is flashing
Two LEDs are on, the third LED is flashing
Three LEDs are on, the fourth LED is flashing
All LEDs are on

Handling and operation

Switch the device on/off

Switching on
♦ Press the ON/OFF button
level LEDs light up for about 15 seconds .
The LED
Automatic switch-off
♦ If no device is connected for charging within 15 seconds, the power bank
switches off automatically to conserve its battery .
Switching off
♦ Press and hold the ON/OFF button
power bank and stop the charging process . The

Display charge level

♦ Press the ON/OFF button
battery for a few seconds . The charge level LEDs
tion about the approximate charge level .
Charge level LEDs
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off
SPBS 5000 B2
.
briefly to switch on the power bank . The charge
lights up blue as long as a connected device is being charged .
briefly to show the charge level of the non-loaded
Charge level
for at least 2 seconds to switch off the
LED
provide you with informa-
Charge level
GB │ IE │ NI
< 25%
25–49%
50–74%
75–99%
100%
goes out .
75 -100 %
50 - 74 %
25 - 49 %
5 - 24 %
< 5 %
0 %
│ 11 ■