Attaching The Suction Cups - SilverCrest SPBS 5000 B2 Mode D'emploi

Attaching the suction cups

NOTE
► To make sure that the suction cups
pletely free of dust, oil and grease .
Variant A
Variant A is suitable for attaching the device to a flat, level surface .
♦ Attach all four suction cups
"Figure A" .
♦ Push the suction cups
♦ Now fasten the suction cups
Figure A
♦ You can now attach the device on a flat, level using the suction cups
■ 8 │ GB │ IE │ NI
hold firmly, the surface must be com-
to the underside of the device, as shown in
into the large holes .
by sliding them into the narrow openings .
.
SPBS 5000 B2