Switching The Automatic Timer On / Off - WR RolloTron Standard Série Mode D'emploi Et D'installation

13.1 Configuring an opening and closing time
Configure a closing time ( t )
(e.g. at 20:30 in the evening)

13.2 Switching the automatic timer on / off

You can toggle between automatic and manual modes at
any time if required.
1.
2.
Pay attention to the control LED.
94
Press and hold the [ clock ] key for
approx. 1 second.
OFF Automatic timer OFF
ON Automatic timer ON
1.
+ Simultaneously briefly press the keys.
2.
The control LED flashes twice, and the
roller shutter moves to the lower end
point.
The automatic timer is now activated
and the indicator light is switched on
continuously.
Your roller shutters will close automati-
cally every day at 20:30.
Flashing
After previous power failure, if at least
one switching time has previously been
configured.
NOTE
In the event of power failure, the switch-
ing times will be extended by the duration
of the power failure, and therefore may
require re-configuration.
EN