Manual Operation - WR RolloTron Standard Série Mode D'emploi Et D'installation

12. Manual operation

After adjusting the end points, you can control the roller
shutter belt winder with the two control buttons. Manual
operation is possible in any of the modes and has priority
over the automatic functions.
1.
Open the roller shutters.
Briefly pressing the button causes the
roller shutters to move to the upper end
point.
2.
Causes the roller shutters to stop in
or
the interim.
3.
Closing the roller shutters.
Briefly pressing the button causes the
roller shutters to move to the lower end
point.
92
EN
Controls