Publicité
Les langues disponibles
Les langues disponibles
Mounting of the hair dryer TH-C1 und TT1800
7.
Pull dust filter (which is not screwed tight)
down out of the appliance.
Pull the mounting plate down and out, too. It
is in the rear of the dryer. It will be required
for the installation on the height adjustment.
8.
TH-C1:Branch off the cordset 7 of the hair dryer
TT1800: Cut off the plug on cordset 14 strip the
wires and crimp the wire-sleeves.
9.
TH-C1:Put mounting plate 11 down on
sledge 3, put the end of spiral cable 7 of the
height adjustment through the opening in
the mounting plate. Slide the hair dryer on
sledge 3 from above. Insert the
mains terminal 8 and connect both cables
according to ill. C.
Safeguard the cables with the enclosed cord-
anchorage clamps 15.
TT1800:Put mounting plate 11 down on sledge
3, put the end of spiral cable 7 of the height
adjustment through the opening in the mounting
plate. Slide the hair dryer on sledge 3 from
above. Insert the enclosed mains terminal 8 and
connect both cables according to ill. B.
Safeguard the cables with the enclosed cord-
anchorage clamps 15.
10.
Clip in the cover cap on the the backside of the
hair dryer
11.
Slide the hair dryer all the way down to cover
plate 11 and put the dust filter from below in the
hair dryer and screw the hexagon socket tight
1 Inserting the cable on the wall
2 Inserting the cable with concealed wires
3 Hair-dryer fixation/sledge
4 Wall mounting/fixation bores
5 -
6 -
7 Spiral cable
8 Mains terminal
9 -
10 Cover plate
Operation
The practical, individual and comfortable
solution for
facilitates
for wheel-chair users. The adjusting range
covers 55 cm. Just slide the hair dryer to the
desired height by means of handle e.
Cleaning and care
Please clean the air-intake grid at the bottom of the
dryer by use of a vacuum cleaner with a crevice
nozzle to remove lint and dust. Dirt which sticks to
the grid shall be brushed away. Simply wipe the
height adjustment with a moist cloth.
Safety hints
Please, check before connecting the appliance
enclosed
whether the voltage indicated on the rating label
is identical to that of your building.
Please, note that improper handling of electrical
appli-ances may cause dangers which children
might not recognize.
Please, hand these instructions over to other
users of the appliance so that they may get
informed about all functions and hints.
On principle, please switch off the mains supply
at all poles before opening and/or cleaning the
product. Always pull on the plug, never on the
cable.
11 Mounting plate
12 Hair dryer
13 Handle
14 Cable of hair dryer
15 Cord-anchorage clamp
16 Weight safety screw
17 Height adjustment
short
and
tall
hair drying considerably,
guests
especially
7
Publicité
