Güde GF 300 E Mode D'emploi page 14

Troubleshooting
The table below shows possible failures, their possible
causes and remedy options. However, if you are unable to
remove the problem, contact a professional to assist you.
Switch the appliance off and unplug it before
servicing and cleaning.
Risk of electric shock.
Symptom Possible cause
No current or
current failure
Defective
extension cable
Appliance not Defective plug,
running engine or switch
Engine circuit
breaker has closed
Defective
extension cable
Appliance failing Internal failure
Defective ON/OFF
switch
Roller is blocked
Abnormal
sounds Bolts, nuts or other
fastening parts are
loosened.
Abnormal Knife is damaged
vibrations or blunt
Unsatisfactory Knives are blunt
result
Remedy
Check the supply,
outlet, protection
Check the extension
cable; defective cable
to be immediately
replaced.
Have the plug, engine
or switch checked or
repaired or replaced by
original parts by a
professional.
1. Blocked roller ->
unblock the roller!
Have the engine cool
down for app. 15
minutes and then
continue in your work.
Check the extension
cable. Replace it if
damaged.
Contact the service
centre.
Contact the service
centre.
Unblock the roller.
Tighten all parts;
contact a service
centre if abnormal
sounds persist.
Contact the service
centre
Contact the service
centre