SilverCrest SKES 2 A1 Mode D'emploi page 8

■ Defective components must always be replaced with original replacement
parts. Compliance with safety requirements can only be guaranteed if original
replacement parts are used.
■ Protect the device against drip and spray water. Never submerge the device
in water, do not set up the device in the vicinity of water and do not place any
object fi lled with liquid (i.e. vases) on the device.
■ Do not place any objects on the device.
■ Do not operate or place the device close to an open fl ame (e.g. candles).
Do not place any lit candles on the product.
■ Avoid exposing the device to direct sunlight.
■ Operate the device only with the supplied power adapter.
■ To avoid damage caused by improper warming, do not cover the mains
power adapter.
■ The POWER button on this device does not completely disconnect the device
from the mains power supply. In addition, the mains adapter consumes
power as long as it is connected to the power socket (standby mode). To
completely disconnect the device from the power supply, the plug must be
removed from the mains power socket.
■ To disconnect the mains adapter, always pull only on the plug itself, not on
the power cable.
■ The mains power socket must be easily accessible so that the mains adapter
can be easily disconnected in an emergency.
■ In the case of a malfunction occurring or a thunderstorm, disconnect the
mains adapter from the power socket.
SKES 2 A1
GB
IE
5