ABON 24V Remote Key-pad 2005 Mode D'emploi page 8

Read the operating instructions carefully be-
fore installing and commissioning. Keep the
operating instructions handy for future use.
Product description
The key-pad for mounting externally can
perform 3 different switching pulses (On / In-
terrupt). The switching pulses are each trig-
gered by a 1 - 6 place numerical code. A
repeat function enables the generation of as
many switching pulses as are necessary af-
ter entering the respective code. 20 seconds
after the last entry, the key-pad is locked au-
tomatically. The repeat function can be inter-
rupted for entering another code.
Packaging
Only reusable materials are used. Dispose
of packaging in an environmentally-friendly
way and according to the legal guidelines in
your area.
Safety information
Improper or accidental operation of the de-
vices and functions controlled by the key-
pad must be prevented. Do not note your co-
des on the key-pad. Mount the key-pad out-
side of the reaching distance of children.
Ensure that the device to be controlled will
pose no hazard before every operation.
Intended usage, Guarantee
The manufacturer must provide written and
exclusive approval for:
•Modifications or attachments
•Repairs performed by persons or busines-
ses that have not be authorised by the ma-
nufacturer
If this approval is not granted, the guarantee
and warranty can become void. No liability
can be assumed for damages that result
from not observing the information in the
operating manual.
Instructions
for installation, programming and operation
of the remote key-pad, see page 14 and on-
ward.
Service and maintenance
Do not use acidic or paint-dissolving cle-
aning solvents.
6
Technical data
Power supply
Switching pulse
Housing
Dimensions (WDH)
Removal, Disposal
Removing the key-pad is perfor-
med in the opposite sequence to
that in the installation instructions.
Dispose of the device according to
environmental guidelines.
EU Declaration of conformity
The described key-pad conforms with all ba-
sic requirements according to Article 10.1
of EC regulations 2002/96/EC (WEEE) and
89/336/EWG (EMC guidelines). The follo-
wing provisions and standards were utilised:
ITE / EN 55024
ABON Antriebe und Sicherheitssysteme
GmbH
Thalbach
D-85368 Wang
Hermann Leppert
01.06.2005
24V AC/DC
3x relay contac
Plastic, Coated, IP55
130 x 95 x 60
Executive director