BoomToneDJ UHF-290d Mode D'emploi page 20

RECEIVER OPERATION
• Select function by adjusting the SET UP knob (2, 10)
(Function details refer to the instruction of Receiver TFT LCD display function)
• For synchronising the microphone, please report to the IR SYNC picture below
Press and hold IR button under unlock status, the receiver will start sending a signal, which will
automatically synchronise the two devices once the procedure is completed.
Press and hold IR button, the receiver will start sending signal when the signal icon is flashing.
Turn on the microphone, put the IR window against the Receiver's IR window. Signal icon disap-
pears when devices are connected through IR, the frequency will be the same between the hand
microphone and the receiver.
Receiver Installation precautions
• At least 1 meter away from the wall.
• At least 1 meter away from the floor.
• Antenna fully pull out, or it may affect signal transmission
20
IR IR
IR
LOCK