Inserting Batteries
EN
DE
1
2
FR
ES
IT
1. Remove the battery compartment cover on
2. Insert two AAA batteries (not included) into
the back of the remote control.
the battery compartment, paying attention to
the correct polarity.
Notes:
• The remote control works within a distance of about 8 meters and with a sensor angle of about 30 degrees from left to right.
• Remove the battery if you do not intend to use the remote control for a long period of time.
• Weak batteries can leak and severely damage the remote control.
• Batteries must not be exposed to excessive heat sources, such as sunshine or fire.
• Please be environmentally friendly and dispose of batteries according to local government regulations.
10
3
3. Reinsert the battery cover.
Operating Instructions
• Press
to switch on the soundbar speaker. Press
again to
put the speaker in standby mode. Press
again to turn off the
speaker.
BT
• Enter BT (Bluetooth) mode
ARC
• Enter ARC mode
• Pause/Resume a playback
• Hold down for 3 seconds to disconnect Bluetooth
(only available for Bluetooth or USB mode)
• Return to the previous track
(only available for Bluetooth or USB mode)
• Turn up the volume
USB
• Enter USB mode
OPT
• Enter Optical In mode
LINE
• Switch between Line In and Aux In mode
AUX
• Skip to the next track
(only available for Bluetooth or USB mode)
• Temporarily switch off the sound. Press again to switch the sound
MUTE
back on
• Turn down the volume
EN
DE
FR
ES
IT
11